Written by Replacing cartridges yourself can be scary because, in most cases, it requires specific knowledge and skills. All filters have cartridges, so you need to contact an RO service near me, thanks to which water is purified. However, these filter elements wear out over time and stop performing their direct cleaning function well. Using a cartridge for a very long time can lead to the opposite effect: the water will not only not be purified but will become even dirtier. Therefore, cartridges must be changed promptly to provide your home with clean, healthy, and harmless water.
WHAT YOU NEED TO CONSIDER IF YOU ARE GOING TO CHANGE THE CARTRIDGE IN YOUR WATER FILTER
First of all, you need to take care of purchasing components. Filter manufacturers often take care of the availability of replaceable modules in the kit. You can also buy cartridges from a different manufacturer than the filters because most filters have standard cartridge sizes. In addition, manufacturers offer modules with other fillers, each responsible for different cleaning types. For example, suppose you decide to change the cartridge in the Barrier pitcher filter. In that case, you can choose a module that removes hardness salts, a cartridge that fills the water with fluoride ions, or any other cartridge of the required size. When installing a new module, please consider the service life indicated on the packaging.
It should be noted that the manufacturer, as a rule, indicates the average service life of cartridges. Since its service life also depends on water contamination and the volume of water used. As mentioned earlier, it is essential to replace cartridges promptly; otherwise, not only will the cleaning efficiency deteriorate, but the reverse process may also begin when contaminants from the cartridge enter the water.
HOW DOES A CARTRIDGE CHANGE OCCUR?
Cartridge replacement is done in different ways; it may depend on the features of the filter and the cartridges themselves. Manufacturers usually provide instructions on maintaining the filter properly, or you can hire RO Service in Patna. The process is different for each system. For example:
Filter jug.
If it is time to change the cartridge in the filter jug, the old one should be unscrewed counterclockwise and thrown away. The jug, lid, and filter should be thoroughly washed (you can even use laundry soap) and rinsed. When screwing in a new module, be sure to rinse the filter with several liters of water.
Flow filter.
Changing the cartridge located in the flow filter for water is more complicated. Such installations can have one to three filter installations, such as flasks with cleaning modules in their design. The algorithm for replacing them is the same: turn off the water supply to the filter;
open the tap on the faucet to release the pressure; place a tray under the filter and open the flask; replace the cartridge; screw the flask on, but not too tightly; close the tap on the mixer and open the water supply to the filter; make sure there are no leaks.
Reverse osmosis system.
The reverse osmosis system replaces pre- and post-filters and the reverse osmosis membrane, which also fails over time. The replacement occurs: The water flow is blocked, the hoses are disconnected from the housing, and the membrane is removed. Then, a new one is inserted, all the parts are connected back, and the water supply is opened.
Main filter.
Specialists of Repair Service Bro change primary filters in cottage systems.
Written by 
Written by